ONCE AGAIN I AM ASKING THE SAME QUESTION IS THERE ANY TECHNOLOGY CALLED RUN OF THE OCEAN(WATER RUNNING OUT OF THE NATURAL BOUNDRIES OF OCEAN TO GENERATE CLEAN AND GREEN ELECRICIY)

RUN OF THE OCEAN : BY MAKING THE OCEAN WATER RUN OUT OF THE NATURAL BOUNDRIES IN MAN MADE RIVER.

WORLDS CHEAPEST ELECTRICITY
RAW MATERIAL IS FREE AND NO TRANSPORTAION CHARGES
SMALL GRID IS SMART GRID IS MY CONCEPT FOR TRANSMISSION TOO
METHOD:
FULL TEXT
Renewable energy is considered to be “environmentally” clean – meaning it is typically non-polluting example the application is water running in man made structures is my idea
‘Head’ is a measurement of water pressure or kinetic energy
In dams the head is often proportional to the height of the water behind the dam (From top of the reservoir to the bottom of turbine tail release) because the powerhouse is to the very bottom of the head in the dam or bottom of the dam
Head is used for make the water run faster and faster down and down with kinetic energy transferred from top of reservoir into turbine blades
By increasing the height of the water level behind the dams increase the force of the falling and running water down the penstock on the turbines blades, thereby increasing electrical generation capacity
Low head dams are less than 30 feet tall and typically have generators smaller than 10 megawatts (MW), whereas high head dams are at least over 500 feet tall and have generators of at least 30 MW and more according to the water availability
Dams store water as a source of fast, reliable and zero emission clean and green energy generation and they can serve as a base load source of electricity to link with variable generation of today’s fossil fuel and nuclear energy
Rivers have water “pressure head” or the running water pressure to turn the turbine for electrical generation
Kindly read my innovation or method (Text)

KINDLY DO NOT COMPARE THIS RUN OF THE OCEAN POWER

GENERATION TO PUMP STORAGE TECHNOLOGY

THIS IS A KIND REQUEST ALWAYS KEEP THIS NOTE WHEN YOU READ

THIS TEXT — THANK YOU

RUN OF THE RIVER HYDRAULICS ARE USED FOR POWER GENERATION

DEAR SIR,
Where h = water depth, A = cross-sectional area, B = surface width, S0 = bottom
slope; Sf = friction slope; V = velocity, g = gravity acceleration and = velocity of the
moving abscissa x. Integration of Eq . (1c) leads to the law x = x(a,t): if = 0

SUBJECT: RUN OF THE OCEAN
{Running water is used to generate power and turbine is in the shape of a revolving garden gate model majority of the running water is hitting the side of the turbine blade for the turbine to spin and water is passing in a straight line from the tail release down into the following reservoir}

RUN OF THE RIVER CONCEPT IS ADOPTED INTO RUN OF THE OCEAN

I HAVE DESIGNED THIS CONCEPT CALLED “RUN OF THE OCEAN”

AND I HAVE DESIGNED CASCADING MARINE HYDRO ELECTRICAL

GENERATION USING THE HYDRAULIC LAWS TO GENERATE GREEN

AND CLEAN ELECTRICITY AND THE APPLICATION IS OCEAN WATER

IN MAN MADE UNDERGROUND RIVER. ONE TIME INVESTMENT

WITH THE DEGREE OF INCLINATION FOR THE WATER TO FLOW

THE DESIGN OF THE PROJECT CHANGES, THE STEEPER THE FLOW

LESS IS THE DISTANCE OF THE UNDERGROUND RIVER EXAMPLE

WITH AT LEAST 1 DEGREE OF SLOPE THE RIVER IS 40 KMS LONG AND

WITH AT LEAST 20 DEGREE SLOPE THE RIVER WILL BE JUST 5 KMS

LONG GENERATING THE SAME AMOUNT OF ELECTRICITY

AS SEEN IN P -1

OCEANS WILL NEVER RUN AND I AM THE ONLY PERSON IN THE

WORLD TO DESIGN A CONCEPT IN WHICH OCEANS RUN BELOW THE

MSL IN MAN MADE STRUCTURES. “EVERY THING IS MAN MADE”

METHOD:

FIRST SELECT A GOOD PLACE FOR DIGGING A UNDERGROUND RIVER

NEAR THE OCEAN SIDE OR THE WATER BODY
(NO HARM TO MARINE LIFE)

PLACE A 250 DIAMETER CIRCLE PIPE RING UNDER A 20 METERS DEEP

OCEAN

DIG A 100-METER DEEP AND 250 DIAMETER WELL SLANTINGLY

SLOPPILY DOWN FROM THE BOTTOM OF 20 METERS DEEP OCEAN

BED

THE WELL IS 250 METERS WIDE (DIA) AND 100 METERS DEEP

“THE WELL IS NOT 100% VERTICAL” BUT SLIGHTLY SLANTING

THE WELL WILL COME OUT OF THE BEACH SIDE AND THE DIGGING

SHOULD BE TOWARDS THE CITY OR THE VILLAGE WHERE PEOPLE

LIVE.

THIS WELLS BOTTOM WILL TOUCH –100 (MINUS 100) METERS

BELOW THE MAIN SEA LEVEL AND UNDER THE EARTH

AT THE WELLS BOTTOM 12 ATMOSPHERIC PRESSURE IS

ESTABLISHED NATURALLY BECAUSE THE WELLS INLET IS IN THE

20 METERS DEEP OCEAN WATER AND THE WATER RUNS DOWN FROM

THE MAIN SEA LEVEL TO MINUS 100 METERS BELOW THE MAIN SEA

LEVEL (20 METERS DEEP OCEAN WATER + 100 METERS WELL)

THE WELL IS COMING OUT OF THE BEACH AREA AND THE WELLS

OUTLET IS ESTABLISHED AT MINUS 100 METERS IN SOLID GROUND

FROM THE WELLS BOTTOM SIDE (250 DIAMETER)

A MAN MADE UNDERGROUND RIVER IS DUG SLANTINGLY DOWN TO

REACH MINUS 450 METERS UNDER THE EARTH

THE TOTAL LENGTH OF THE MAN MADE RIVER IS 40 KILOMETERS

LONG, 150 METERS WIDE AND 150 METERS DEEP

(FROM – 120 METERS BOTTOM SIDE TO – 450 METERS
FULL OF RUNNING WATER IN A STRAIGHT PATH
VERY BIG KINETIC ENERGY THE RIVER IS HAVING A
ANTI CORROSIVE FIBER GLASS PADDING TO REDUCE
FRICTIONAL LOSS WHEN THE WATER RUNS DOWN
THE PATH)

THE 250 DIAMETER WELL HAVING 120 METERS DEPTH WILL ACT AS A

“HYDRAULIC HEAD” FOR THE UNDERGROUND MAN MADE RIVER

AT THE RIVER INLET 12 ATMOSPHERIC PRESSURE IS ESTABLISHED

NATURALLY 24 X 7 ALL THE YEAR

ON THIS SLANTINGLY SLOPPILY DOWN MAN MADE UNDERGROUND

RIVER 20 INDEPENDENT POWER GENERATION STATIONS ARE

CONSTRUCTED IN CASCADING TYPE ONE AFTER ANOTHER

THERE IS A GAP OF 2 KILOMETERS IN BETWEEN TWO INDEPENDENT

POWER GENERATION STATIONS

WHEN WATER IS RELEASED FROM THE BOTTOM OF THE WELL AND

ENTER THE UNDERGROUND RIVER INLET THE RELEASED WATER

WILL RUN 2 KILOMETERS LONG AND OCCUPY 150 METERS WIDTH

AND 150 METERS DEPTH WITH FULL OF RUNNING WATER

THIS 2 KILOMETERS LONG MAN MADE UNDERGROUND RIVER IS

CONVERTED AS A MAN MADE RESERVOIR CALLED THE P1

RESERVOIR

P1 IS THE “MASTER RESERVOIR”.

HERE THE ATMOSPHERIC PRESSURE WILL BE 27

(20 METERS DEEP OCEAN WATER +100 METERS DEEP WELL + 150
DIAMETER UNDERGROUND RIVER TOTAL 270 METERS)

THIS RESERVOIR DIAMENTIONS WILL BE INLET 150 DIAMETERS AND

OUTLET 40 DIAMETERS AND WILL LOOK LIKE A MISSILE.

THERE WILL BE 20 INDIPENDENT RESERVOIRS ON THE 40

KILOMETERS LONG SLANTINGLY SLOPPILY DOWN RIVER

ALL 20 INDEPENDENT RESERVOIRS WILL BE IDENTICAL i.e.

IN METERS ONLY (kindly arrange p1 reservoir outlet to p2 reservoir inlet)
The system follows like the railway compartments one after another
PI RESERVOIR: 150 DIAMETERS INLET AND 40 DIAMETERS OUTLET
P2 RESERVOIR: 150 DIAMETERS INLET AND 40 DIAMETERS OUTLET
P3 RESERVOIR: 150 DIAMETERS INLET AND 40 DIAMETERS OUTLET
P4 RESERVOIR: 150 DIAMETERS INLET AND 40 DIAMETERS OUTLET,
P19 RESERVOIR: 150 DIAMETERS INLET AND 40 DIAMETERS OUTLET
And to the last
P20 RESERVOIR: 150 DIAMETERS INLET AND 40 DIAMETERS OUTLET

THE CONCEPT DESIGN IS INLET 150 DIAMETERS AND OUTLET 40

DIAMETERS. POWER GENERATION IS DONE IN THE PATH OF

FLOWING WATER COMING OUT OF THE 40 DIAMETER OUTLETS

WATER WHEN RELEASED FROM 40 DIAMETER OUTLET THE

RELEASED WATER WILL HAVE A WATER PRESSURE HEAD TO

IMPINGE EACH (GARDEN GATE MODEL) TURBINE INDEPENDENTLY

KINDLY UNDERSTAND EACH INDEPENDENT RESERVOIR DIMENTIONS

AND UNDERSTAND THE VELOCITY OF THE RELEASED WATER FROM

EACH RESERVOIR OUTLET BECAUSE WATER IS RUNNING DOWN AND

DOWN FROM –120 METERS, WELLS BOTTOM SIDE TO REACH MINUS

450 METERS BELOW THE MAIN SEA LEVEL

KINDLY NOTE THE OCEAN OR THE WATER BODY WILL BE 450

METERS ABOVE THE TAIL POND

WATER IS CONTINOUSLY RUNNING DOWN STRAIGHT FROM THE

MAIN SEA LEVEL TO MINUS 450 METERS THE WATER HAS TO RUN 40

KILOMEERS LENGTH AND THE RUNNING WATER IS PASSING

THROUGH 20 INDEPENDENT POWER HOUSES BEFORE THE WATER

WILL FALL AS A WATER FALL INTO THE TAIL POND SIUATED AT —

450 METERS BELOW MSL

THERE ARE NO TWISTS AND TURNS FOR THE RUNNING WATER

TOTAL DEPTH 450 METERS (MSL TO –450 METERS UNDER EARTH)

POINT 1)
WELL 120 METERS DEEP

(HYDRAULIC HEAD : 20 METERS DEEP OCEAN WATER + 100 METER

DEEP SLANTINGLY WELL)

POINT 2)

UNDERGROUND MAN MADE RIVER 150 DIAMETER RUNNING DOWN

FROM THE VERY BOTTOM OF THE WELL (HYDRAULIC HEAD 120Mtrs)

FROM –120 METERS TO — 450 METERS IS THE SLANTINGLY SLOPPILY

DOWN MAN MADE RIVER

TOTAL 330 METERS SLOPE IS THE BALANCE IN WHICH 150

DIAMETERS RIVER RUNS DOWN FROM – 120 METERS TO – 450

METERS TO FALL INTO THE TAIL POND

WATER WILL NEVER RISE THE ABOVE DESCRIBED

DIMENTIONS OF THE UNDERGROUND RIVER

NOTE:
(FROM “BOTTOM SIDE OF THE WELL’’150 DIAMETERS

MAN MADE UNDERGROUND RIVER FULL OF RUNNING WATER

RUNNING DOWN AND DOWN LIKE WATER RUNNING DOWN THE

SLOPE OF A 450 METERS TALL MOUNAIN

(FROM TOP TO BASE OF THE MOUNTAIN)

ABOVE THE UNDERGROUND RIVER 120 METERS IS THE TOTAL

HEIGHT (HYDRAULIC HEAD) EVER GREEN 12 ATMOSPHERIC

PRESSURE

AND IN THE ENTIRE CONCEPT (P1 TO P20 AND IN THE TAIL POND)

WATER WILL NEVER TOUCH THE MAIN SEA LEVEL

With energy needs rising and ever-growing requirements for cleaner energy sources, our company is dedicated to extracting renewable energy from our environment – cleanly, efficiently, and appropriately. This concept illustrate our creative solutions for green energy generation.
· There is a significant altitude drop, where the water comes into the “master” p1 reservoir before being distributed to other reservoirs p2 to p20 arranged in cascading manner, rushing over a drop of few hundred feet at every reservoir, Operating at the high plant factor of 60% requires durable machines and accurate control equipment and less people.
· This concept depends on automatic system combinations with SCADA(supervisory control and data acquisition, SCADA systems and software permit them to analyze all these issues, related to capacity, transmission and distribution, and respond effectively to prevailing market conditions in both the wholesale and retail markets.) usages are specifically geared for high usage and profitable operations. The fully automatic station will be trouble-free. All were reviewed on a levelized basis, taking into account capital costs, fuel costs, O&M costs, financing costs etc

1

Answers


  1. 0 Votes

    I have not heard of it, but that does not mean it’s not in the research and design phase. the energy technology that I know about which is closest to what you are describing is Wave Energy. It harnesses the energy in the kinetic movement of the waves. It is best utilized along the western coasts of continents or along extreme latitudes.

Please signup or login to answer this question.

Sorry,At this time user registration is disabled. We will open registration soon!